How do you fix water seeping in through an external wall?
Common causes are cracks in the wall, aged sealant around window frames, poorly sealed air-conditioner openings and pipe penetrations, and hollow mosaic or tiles. We first confirm where and why the water is entering, then apply crack injection, window re-sealing, local repair or a waterproof wall coating as appropriate, and verify the result with a water spray test.
Common signs
- Stains or mould around or below windows
- Paint blistering on internal walls after rain
- Visible cracks, or loose mosaic or tiles on the facade
- Leaks near air-conditioner openings or pipe penetrations
Method statement
- Survey and water testInspect cracks, window frames and penetrations, and run a water spray test where needed to confirm the leak path; drone imaging can assist at height.
- AccessArrange scaffolding, a gondola or another safe means of access to suit location and height.
- Crack treatmentRake out and fill cracks with waterproof material; inject PU into actively leaking cracks.
- Windows and penetrationsRemove aged sealant and re-seal; repair around air-conditioner openings and pipes.
- Finish repairTreat hollow or loose mosaic and tiles.
- Waterproof coatingApply clear or coloured waterproof wall coating where required.
- Water test and handoverSpray-test treated areas and confirm no water enters the unit.
Systems and materials
| System | Typical use |
|---|---|
| PU injection | Actively leaking wall or concrete cracks |
| Waterproof sealant | Window and door frames, pipe penetrations |
| Clear waterproof coating | Keeps the mosaic or tile appearance while reducing water ingress |
| Elastomeric wall coating | Rendered or painted walls; bridges hairline cracks |
We commonly use Nippon and Sika products. The final system depends on the wall finish, leak condition and budget, and is stated in the quotation.
Testing and records
- Water spray test
- Photo record of key stages
- Warranty typically 1–5 years, stated in the quotation according to system and scope
Information we need for a quote
- Address, floor and unit location
- Photos of the leak inside
- Photos of wall cracks or window frames outside
- Whether common external walls are involved (owners' corporation or management approval required)
FAQ
Does a leaking window only need re-sealing?
If the leak comes from aged sealant, re-sealing usually works. If the problem is the frame itself, the sill fall or a wall crack, sealant alone may not be enough. The leak path should be tested first.
Is scaffolding required?
It depends on location and height. Low-level areas or those reachable from inside may not need it; high-level facades usually need scaffolding or a gondola. Access arrangements are stated in the quotation.
Can an individual owner repair the external wall?
External walls are usually common parts of the building, so approval from the owners' corporation or management company is needed first. We can help provide the information required.
What is PU crack injection?
Polyurethane (PU) resin is injected under pressure into concrete cracks to fill them and block the water path. It is commonly used for leaking walls, basements and water tanks.
How do you fix water leaking around a window?
Most window leaks come from failed sealant between the frame and wall, or cracks near the frame. We remove the old sealant, mask the edges and apply new sealant, then confirm with a water spray test.
How long is the warranty for external wall waterproofing?
Our warranty for external wall waterproofing is typically 1–5 years. The exact period depends on the system, materials and scope, and the warranty terms are stated in the quotation.



